HP Workstation zx2000 HP Workstation zx2000 Getting Started Guide - Page 8

Setting Up and Using Your System system description The zx2000 workstation is available in tower and rack-mount configurations. front panel The hp workstation zx2000 front panel has the following features: ■ Two front-access USB connectors. ■ Two front-access optical drive bays. ■ Power button to turn system on or off. ■ Power LED: green when the power is on or the power button is pushed in. If the power is on and the button is pushed in, the light will stay on even after the system is powered down. When the button is released, the green light turns off. ■ Activity LED: indicates whether the system is accessing any of the hard drives or optical drives (IDE or SCSI). If the LED is: ❏ off, the system is off, or the system is not accessing internal drives ❏ blinking green, the system is accessing an internal drive NOTE: The Activity LED is only active on systems purchased after March 2003. NOTE: The Activity LED automatically communicates with IDE HDD or optical drives. To communicate with SCSI drives, a SCSI LED activity cable must connect the SCSI card and the system board. ■ System and Diagnostic LEDs provide information about system errors. ■ Locator Button and LED (rack-mount configuration only) identifies the rack position of the workstation. 1-2 Getting Started Guide