IBM 88614RX Maintenance Manual - Page 101

Verify that no devices have been disabled in CMOS., Remove failing PCI card.

Get IBM 88614RX - Eserver xSeries 365 PDF manuals and user guides
UPC - 000435172662
View all IBM 88614RX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 101 highlights

Note: See Chapter 7, "Parts listing, Types 8861, 8862," on page 139 to determine which components are replaceable by the customer and which components must be replaced by an IBM field service technician. Error code/symptom FRU/action 00019704 (Processor 4 failed BIST) 1. Microprocessor 4 2. VRM4 3. Microprocessor tray assembly 00180100 (A PCI adapter has requested memory resources that are not available) 1. Reorder the adapters in the PCI slots. It is important that your boot device is positioned early in the scan order so that it is executed by POST. 2. Verify that the PCI adapter and all other adapters are set correctly in the Configuration/Setup Utility program. If the memory resource settings are not correct, change the settings. 3. If all memory resources are being used, you might need to remove an adapter to make memory available to the PCI adapter. Disabling the adapter BIOS on the adapter should correct the error. Refer to documentation provided with the adapter. 00180200 (No more I/O space available for PCI adapter) 1. Run Configuration/Setup. 2. Failing adapter. 3. I/O board. 00180300 (No more memory (above 1MB for PCI adapter)) 1. Run Configuration/Setup. 2. Failing adapter. 3. I/O board. 00180400 (No more memory (below 1MB for PCI adapter)) 1. Run Configuration/Setup. 2. Failing adapter. 3. I/O board. 00180500 (PCI option ROM checksum error) 1. Remove failing PCI card. 2. I/O board. 00180600 (PCI built-in self test failure) 1. Run Configuration/Setup. 2. Failing adapter. 3. I/O board. 00180700, 00180800 (General PCI error) 1. Verify that no devices have been disabled in CMOS. 2. I/O board. 3. PCI card 00181000 (PCI error) 1. Remove adapters in PCI slots. 2. I/O board. 00181100 (RXE100 communication error) 1. Check RXE-100 drawer management cable (RS-485). 2. Check service processor in host. 3. Verify DMC code level in RXE-100. 00181200 (RXE-100 requested slots unavailable) 1. Release slots from other shared host. 2. Verify code level in RXE-100. 3. Verify slot request in Configuration/Setup Utility program. 4. Check RIOG cable. 01295085 (ECC checking hardware test error) 1. Microprocessor 2. DIMM 3. Microprocessor tray assembly Chapter 6. Symptom-to-FRU index 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
Note: See Chapter 7, “Parts listing, Types 8861, 8862,” on page 139 to determine which components are
replaceable by the customer and which components must be replaced by an IBM field service technician.
Error code/symptom
FRU/action
00019704
(Processor 4 failed BIST)
1.
Microprocessor 4
2.
VRM4
3.
Microprocessor tray assembly
00180100
(A PCI adapter has requested
memory resources that are not available)
1.
Reorder the adapters in the PCI slots. It is important that
your boot device is positioned early in the scan order so that
it is executed by POST.
2.
Verify that the PCI adapter and all other adapters are set
correctly in the Configuration/Setup Utility program. If the memory
resource settings are not correct, change the settings.
3.
If all memory resources are being used, you might need to
remove an adapter to make memory available to the PCI adapter.
Disabling the adapter BIOS on the adapter should correct the
error. Refer to documentation provided with the adapter.
00180200
(No more I/O space available for
PCI adapter)
1.
Run Configuration/Setup.
2.
Failing adapter.
3.
I/O board.
00180300
(No more memory (above 1MB for
PCI adapter))
1.
Run Configuration/Setup.
2.
Failing adapter.
3.
I/O board.
00180400
(No more memory (below 1MB for
PCI adapter))
1.
Run Configuration/Setup.
2.
Failing adapter.
3.
I/O board.
00180500
(PCI option ROM checksum error)
1.
Remove failing PCI card.
2.
I/O board.
00180600
(PCI built-in self test failure)
1.
Run Configuration/Setup.
2.
Failing adapter.
3.
I/O board.
00180700, 00180800
(General PCI error)
1.
Verify that no devices have been disabled in CMOS.
2.
I/O board.
3.
PCI card
00181000
(PCI error)
1.
Remove adapters in PCI slots.
2.
I/O board.
00181100
(RXE100 communication error)
1.
Check RXE-100 drawer management cable (RS-485).
2.
Check service processor in host.
3.
Verify DMC code level in RXE-100.
00181200
(RXE-100 requested slots
unavailable)
1.
Release slots from other shared host.
2.
Verify code level in RXE-100.
3.
Verify slot request in Configuration/Setup Utility program.
4.
Check RIOG cable.
01295085
(ECC checking hardware test error)
1.
Microprocessor
2.
DIMM
3.
Microprocessor tray assembly
Chapter 6. Symptom-to-FRU index
91