IBM 88614RX Maintenance Manual - Page 52
Attention, unpainted metal surface on the server. Then, remove the DIMM from
UPC - 000435172662
View all IBM 88614RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
DCAC PS2 PS1 4. Open the retaining clip on each end of the DIMM connector. Attention: To avoid breaking the DIMM retaining clips or damaging the DIMM connectors, open and close the clips gently. 5. Touch the static-protective package that contains the DIMM option to any unpainted metal surface on the server. Then, remove the DIMM from the package. 6. Turn the DIMM so that the DIMM keys align correctly with the slot. Note: The following illustration shows installing DIMMs in an 8-DIMM-connector memory board. 42 IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide
AC
DC
PS2
PS1
4.
Open the retaining clip on each end of the DIMM connector.
Attention:
To avoid breaking the DIMM retaining clips or damaging the DIMM
connectors, open and close the clips gently.
5.
Touch the static-protective package that contains the DIMM option to any
unpainted metal surface on the server. Then, remove the DIMM from the
package.
6.
Turn the DIMM so that the DIMM keys align correctly with the slot.
Note:
The following illustration shows installing DIMMs in an 8-DIMM-connector
memory board.
42
IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide