IBM 88614RX Maintenance Manual - Page 122

Power Supply X 12V Over Voltage Fault

Get IBM 88614RX - Eserver xSeries 365 PDF manuals and user guides
UPC - 000435172662
View all IBM 88614RX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 122 highlights

Note: See Chapter 7, "Parts listing, Types 8861, 8862," on page 139 to determine which components are replaceable by the customer and which components must be replaced by an IBM field service technician. Service Processor message FRU/action IP address of default gateway modified from v Information only x.x.x.x IP address of network interface modified from x.x.x.x v Information only IP subnet mask of network interface modified v Information only from x.x.x.x Loader Watchdog Triggered 1. Reconfigure Loader Watchdog timer to be a higher value (twice the normal OS boot time). 2. Install the Remote Supervisor Adapter II device driver for the appropriate operating system. 3. Disable the Loader Watchdog. 4. Check integrity of the installed operating system. 5. Re-install the operating system with appropriate device drivers. Memory Port X Power Fault 1. Verify that microprocessor tray assembly is fully engaged with memory cassette. 2. Microprocessor tray assembly. Multiple fan failures v Replace any missing or failed fans or power supplies. OS Watchdog Triggered 1. Reconfigure O/S Watchdog timer to be a higher value. 2. Re-Install the Remote Supervisor Adapter II device driver for the appropriate operating system. 3. Disable the O/S Watchdog. 4. Check integrity of the installed operating system. 5. Re-install the operating system with appropriate device drivers. PFA Alert v See preceding entry in error log. POST Watchdog Triggered 1. Reconfigure POST Watchdog timer to be a higher value (consistent with time it takes to complete POST). 2. Disable the POST Watchdog. Power Supply X 12V Over Current Fault 1. Power supply 2. Power backplane Power Supply X 12V Over Voltage Fault 1. Power supply 2. Power backplane Power Supply X 12V Under Voltage Fault 1. Power supply 2. Power backplane Power Supply X AC Power Removed 1. Insert the ac cord into power supply X. 2. Replace power supply X. Power Supply X Current Fault 1. Power supply 2. Power backplane 112 IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
Note: See Chapter 7, “Parts listing, Types 8861, 8862,” on page 139 to determine which components are
replaceable by the customer and which components must be replaced by an IBM field service technician.
Service Processor message
FRU/action
IP address of default gateway modified from
x.x.x.x
v
Information only
IP address of network interface modified
from x.x.x.x
v
Information only
IP subnet mask of network interface modified
from x.x.x.x
v
Information only
Loader Watchdog Triggered
1.
Reconfigure Loader Watchdog timer to be a higher value
(twice the normal OS boot time).
2.
Install the Remote Supervisor Adapter II device driver for the
appropriate operating system.
3.
Disable the Loader Watchdog.
4.
Check integrity of the installed operating system.
5.
Re-install the operating system with appropriate device drivers.
Memory Port X Power Fault
1.
Verify that microprocessor tray assembly is fully engaged
with memory cassette.
2.
Microprocessor tray assembly.
Multiple fan failures
v
Replace any missing or failed fans or power supplies.
OS Watchdog Triggered
1.
Reconfigure O/S Watchdog timer to be a higher value.
2.
Re-Install the Remote Supervisor Adapter II device driver for
the appropriate operating system.
3.
Disable the O/S Watchdog.
4.
Check integrity of the installed operating system.
5.
Re-install the operating system with appropriate device drivers.
PFA Alert
v
See preceding entry in error log.
POST Watchdog Triggered
1.
Reconfigure POST Watchdog timer to be a higher value
(consistent with time it takes to complete POST).
2.
Disable the POST Watchdog.
Power Supply X 12V Over Current Fault
1.
Power supply
2.
Power backplane
Power Supply X 12V Over Voltage Fault
1.
Power supply
2.
Power backplane
Power Supply X 12V Under Voltage Fault
1.
Power supply
2.
Power backplane
Power Supply X AC Power Removed
1.
Insert the ac cord into power supply X.
2.
Replace power supply X.
Power Supply X Current Fault
1.
Power supply
2.
Power backplane
112
IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide