IBM 88614RX Maintenance Manual - Page 31

b. The following illustration shows the internal connectors and LEDs on the 16-DIMM-connector memory board in the memory cassette. DIMM 8 error LED DIMM 7 error LED DIMM 6 error LED DIMM 5 error LED DIMM 4 error LED DIMM 3 error LED DIMM 2 error LED DIMM 1 error LED DIMM 9 error LED DIMM 10 error LED DIMM 11 error LED DIMM 12 error LED DIMM 13 error LED DIMM 14 error LED DIMM 15 error LED DIMM 16 error LED DIMM connector 1 DIMM connector 2 DIMM connector 3 DIMM connector 4 DIMM connector 5 DIMM connector 6 DIMM connector 7 DIMM connector 8 DIMM connector 16 DIMM connector 15 DIMM connector 14 DIMM connector 13 DIMM connector 12 DIMM connector 11 DIMM connector 10 DIMM connector 9 4. If necessary, open the DIMM access doors on the memory cassette to view the DIMM LEDs. Remind button You can use the remind button to place the system-error LED on the front panel into the remind mode (flashes every 2 seconds). By pressing this button, you acknowledge the failure but indicate that you will not take immediate action. If a new failure occurs, the system-error LED is lit again. The system-error LED stays in remind mode until one of the following conditions occurs: v All known problems are solved. v The server is restarted. Chapter 3. Diagnostics 21