IBM 88614RX Maintenance Manual - Page 98

POST error codes, Run Configuration/Setup

Get IBM 88614RX - Eserver xSeries 365 PDF manuals and user guides
UPC - 000435172662
View all IBM 88614RX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 98 highlights

Note: See Chapter 7, "Parts listing, Types 8861, 8862," on page 139 to determine which components are replaceable by the customer and which components must be replaced by an IBM field service technician. No beep symptom FRU/action System will not power-up (Power supply ac LED is on) v See "Power LED errors" on page 130. POST error codes In the following error codes, X can be any number or letter. Note: See Chapter 7, "Parts listing, Types 8861, 8862," on page 139 to determine which components are replaceable by the customer and which components must be replaced by an IBM field service technician. Error code/symptom FRU/action 062 (Three consecutive boot failures using the 1. Flash system to latest level. default configuration.) 2. I/O board. 101, 102 (Tick timer internal interrupt, internal v I/O board timer channel 2) 106 (Diskette controller failure) v I/O board 114 (Adapter read-only memory (ROM) error) 1. Remove adapters and reinstall one at a time; replace failing adapter. 2. I/O board. 151 (Real time clock error) 1. Battery 2. I/O board 161 (Real time clock battery error) 1. Battery 2. I/O board 162 (Device Configuration Error) 1. Run Configuration/Setup Note: Be sure to load the default settings and any additional desired settings; then, save the 2. Battery configuration 3. Failing device 4. I/O board 163 (Real-Time Clock error) 1. Run Configuration/Setup. 2. Battery. 3. I/O board. 175 (Hardware error) 1. I/O board 2. Service processor 177, 178 (Security hardware error) 1. Run Configuration/Setup. 2. I/O board. 3. Service processor. 184 (Power-on password corrupted) 1. Run Configuration/Setup. 2. Battery. 3. I/O board. 186 (Security hardware control logic failed) 1. Run Configuration/Setup. 2. I/O board. 3. Service processor. 88 IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
Note: See Chapter 7, “Parts listing, Types 8861, 8862,” on page 139 to determine which components are
replaceable by the customer and which components must be replaced by an IBM field service technician.
No beep symptom
FRU/action
System will not power-up
(Power supply ac LED is on)
v
See “Power LED errors” on page 130.
POST error codes
In the following error codes, X can be any number or letter.
Note: See Chapter 7, “Parts listing, Types 8861, 8862,” on page 139 to determine which components are
replaceable by the customer and which components must be replaced by an IBM field service technician.
Error code/symptom
FRU/action
062
(Three consecutive boot failures using the
default configuration.)
1.
Flash system to latest level.
2.
I/O board.
101, 102
(Tick timer internal interrupt, internal
timer channel 2)
v
I/O board
106
(Diskette controller failure)
v
I/O board
114
(Adapter read-only memory (ROM) error)
1.
Remove adapters and reinstall one at a time; replace failing
adapter.
2.
I/O board.
151
(Real time clock error)
1.
Battery
2.
I/O board
161
(Real time clock battery error)
1.
Battery
2.
I/O board
162
(Device Configuration Error)
Note:
Be sure to load the default settings and
any additional desired settings; then,
save the
configuration
1.
Run Configuration/Setup
2.
Battery
3.
Failing device
4.
I/O board
163
(Real-Time Clock error)
1.
Run Configuration/Setup.
2.
Battery.
3.
I/O board.
175
(Hardware error)
1.
I/O board
2.
Service processor
177, 178
(Security hardware error)
1.
Run Configuration/Setup.
2.
I/O board.
3.
Service processor.
184
(Power-on password corrupted)
1.
Run Configuration/Setup.
2.
Battery.
3.
I/O board.
186
(Security hardware control logic failed)
1.
Run Configuration/Setup.
2.
I/O board.
3.
Service processor.
88
IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide