Icom IC-718 Instruction Manual - Page 14
Power supply connections - used
View all Icom IC-718 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3 INSTALLATION AND CONNECTIONS s Power supply connections Use an optional PS-85 DC POWER SUPPLY when operating the IC-718 with AC power. Refer to the diagrams below. CONNECTING PS-85 DC POWER SUPPLY CAUTION: Before connecting the DC power cable, check the following important items. Make sure: • The [POWER] switch is OFF. • Output voltage of the power source is 12-15 V when you use a non-Icom power supply. • DC power cable polarity is correct. Red : positive + terminal Black : negative _ terminal PS-85 13 9 10 11 12 5678 1234 DC power socket Connect to an AC outlet using the supplied AC cable. DC power cable CONNECTING NON-ICOM DC POWER SUPPLY DC power supply AC outlet DC power 13.8 V 20 A socket _+ 13 9 10 11 12 5678 1234 AC cable _ black Supplied + red DC power cable 20 A fuses CONNECTING A VEHICLE BATTERY Grommet NEVER connect to a 24 V battery. _ black + red NOTE: Use terminals for the cable connections. Crimp 12 V battery Supplied DC power cable Solder Fuses NEVER connect to a battery without supplied DC fuses, otherwise the fire hazard may occur. 12