Icom IC-718 Instruction Manual - Page 40

6 MEMORY OPERATION D Transferring in memory mode This is useful for transferring frequency and operating mode while operating in memory mode. When you have changed the frequency or operating mode in the selected memory channel: • Displayed frequency and mode are transferred. • Programmed frequency and mode in the mem- ory channel are not transferred, and they remain in the memory channel. q Push [CH], then select the memory channel to be transferred with [UP Y] or [Z DN] in memory mode. • And, set the frequency or operating mode if required. w Push [M≈V] for 1 sec. to transfer the frequency and operating mode. • Displayed frequency and operating mode are transferred to the VFO. e To return to VFO mode, push [V/M] momentarily. TRANSFERRING EXAMPLE IN MEMORY MODE Operating frequency : 14.020 MHz/CW (M-ch 16) Contents of M-ch 16 : 14.018 MHz/CW Rotate dial. 6 M V Push for 1 sec. Beep Beep Beep 1 V/M VFO A is displayed. √ 1 V/M M-ch 16 is displayed. s Memory clearing Any unnecessary memory channels can be cleared. The cleared memory channels become blank channels. q Select memory mode with [V/M]. w Push [CH], then select the memory channel to be cleared with [UP Y] or [Z DN]. e Push [M-CL] for 1 sec. to clear the contents. • The programmed frequency and operating mode disappear. • "BLANK" appears. r To clear other memory channels, repeat steps w and e. 5 M-CL Push for 1 sec. Beep Beep Beep 38