Icom IC-718 Instruction Manual - Page 42
Programmed scan operation, Memory scan operation
View all Icom IC-718 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
7 SCANS s Programmed scan operation q Select VFO mode with [V/M]. w Select the desired operating mode. • The operating mode can also be changed while scanning. e Set [RF/SQL] open or closed. • See previous page for scan condition. • If the [RF/SQL] control function is set as RF control, the squelch always opens. See pgs. 15, 20 for details. r Push [SCAN] to start the programmed scan. • "SCAN" appears while scanning. t When the scan detects a signal, the scan stops, pauses or ignores it depending on the resume setting and the squelch condition. y To cancel the scan, push [SCAN]. If the same frequencies are programmed into the scan edge memory channel P1 and P2, programmed scan does not start. s Memory scan operation q Select memory mode with [V/M]. w Select the desired operating mode. • The operating mode can also be changed while scanning. e Set [RF/SQL] open or closed. • See previous page for scan condition. • If the [RF/SQL] control function is set as RF control, the squelch always opens. See pgs. 14, 30 for details. r Push [SCAN] to start the memory scan. • "SCAN" appears while scanning. t When the scan detects a signal, the scan stops, pauses or ignores it depending on the resume setting and the squelch condition. y To cancel the scan, push [SCAN]. 2 or more memory channels must be programmed for memory scan to start. 40