Intel SC5400RA User Guide - Page 100

seal between the heat sink and the processor., If a processor is installed under the heatsink

Get Intel SC5400RA - Server System - 0 MB RAM PDF manuals and user guides
UPC - 675900759336
View all Intel SC5400RA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 100 highlights

You will need to remove the heatsink under the following conditions: • A processor is installed under the heatsink and you need to remove the processor. • You are installing a processor in this processor socket for the first time. The system was shipped to you with the heatsinks installed over the empty processor sockets. The heatsinks must both be installed at all times during system operation. Use the following steps to remove a heatsink: 1. Unscrew the captive screws on each corner of the heatsink. 2. If a processor is installed under the heatsink, twist the heat sink slightly to break the seal between the heat sink and the processor. 3. Lift the heat sink from the system. If it does not pull up easily, make sure the screws are fully loosened and twist the heat sink slighly again if a processor is installed beneath the heatsink. Do not force the heatsink from the processor. Doing so could damage the processor. 78 Intel® Server System SC5400RA User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
78
Intel® Server System SC5400RA User’s Guide
You will need to remove the heatsink under the following conditions:
•
A processor is installed under the heatsink and you need to remove the processor.
•
You are installing a processor in this processor socket for the first time. The system
was shipped to you with the heatsinks installed over the empty processor sockets.
The heatsinks must both be installed at all times during system operation.
Use the following steps to remove a heatsink:
1.
Unscrew the captive screws on each corner of the heatsink.
2.
If a processor is installed under the heatsink, twist the heat sink slightly to break the
seal between the heat sink and the processor.
3.
Lift the heat sink from the system. If it does not pull up easily, make sure the screws
are fully loosened and twist the heat sink slighly again if a processor is installed
beneath the heatsink. Do not force the heatsink from the processor. Doing so could
damage the processor.