Intel SC5400RA User Guide - Page 64
Installing and Removing a Slimline USB Floppy/ CD-ROM / DVD-ROM Drive Combo
![]() |
UPC - 675900759336
View all Intel SC5400RA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Installing and Removing a Slimline USB Floppy/ CD-ROM / DVD-ROM Drive Combo Note: You can install either a slimline CD-ROM drive OR a slimline DVD-ROM drive.You cannot install both. Note: For Intel supplied CD-ROM/DVD-ROM drives, the correct setting is "No Jumper". Note: For non-Intel supplied CD-ROM/DVD-ROM drives, see the documentation that came with your slimline drive for master/slave jumper settings. Installing a Slimline USB Floppy / CD-ROM / DVD-ROM Slimline Kit 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server system and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover" on page 24. 4. Remove the front bezel. For instructions, see "Removing the Bezel Assembly (Pedestal Only)" on page 26. 5. Remove the two screws that attach the drive cage to the drive bay. See letter "A" in the following figure. 6. Tilt the rear of the drive cage up and slide it rearward. See letter "B". 7. Lift the drive cage up and out of the drive bay. B A AF001522 Figure 41. Removing Drive Cage from Drive Bay 42 Intel® Server System SC5400RA User's Guide
![](/manual_guide/products/intel-sc5400ra-user-guide-6ba0df6/64.png)