Intel SC5400RA User Guide - Page 73
Installing and Removing a DVD-ROM or CD-ROM Drive
UPC - 675900759336
View all Intel SC5400RA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Installing and Removing a DVD-ROM or CD-ROM Drive Installing a DVD-ROM or CD-ROM Drive 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover" on page 24. 4. Remove the front bezel if it is installed. For instructions, see "Removing and Installing the Front Bezel" on page 26. 5. Remove the EMI shield/slide assembly from the upper device bay by pressing the two slide assembly latches inward. See letter "A" in the following figure. 6. Remove the slides from the EMI shield by pulling the slides away from the EMI shield to release them from the EMI shield. See letter "B". A A B B AF000945 Figure 56. Removing EMI Shield/Slide Assembly from Upper Device Bay 7. Attach slides to the DVD-ROM or CD-ROM drive by pressing the slides firmly into the side dimples on the DVD-ROM or CD-ROM drive. Intel® Server System SC5400RA User's Guide 51