Intel SC5400RA User Guide - Page 60
Installing and Removing Hot-swap Drive(s), Installing Hot-swap Drive(s)
![]() |
UPC - 675900759336
View all Intel SC5400RA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Installing and Removing Hot-swap Drive(s) Your server system will have either hot-swap or fixed drives. If your server system has fixed drives, see "Installing and Removing Fixed Hard Drive(s)" on page 28 for drive installation and removal steps. Installing Hot-swap Drive(s) 1. Press in on the green latch at the end of the drive carrier to disengage it from the hot swap drive cage. See letter "A" in the following figure. 2. Pull out on the black lever to fully open the drive carrier. See letter "B" in the figure. 3. When the lever reaches a fully opened position, it will push the drive carrier out from the hot swap drive cage. Slide the drive carrier out of the drive cage. See letter "C".. A B C AF000589 Figure 33. Removing Drive Carrier from Hot-swap Cage 4. Remove the four screws that secure the plastic air baffle to the drive carrier. Remove the plastic air baffle. AF000590 Figure 34. Removing Plastic Air Baffle 38 Intel® Server System SC5400RA User's Guide
![](/manual_guide/products/intel-sc5400ra-user-guide-6ba0df6/60.png)