Intel SC5400RA User Guide - Page 96
Removing a Processor, Opening Processor Socket Lever, Opening Load Plate
![]() |
UPC - 675900759336
View all Intel SC5400RA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Removing a Processor 1. Observe the safety and ESD precautions in "Safety Information" on page 129. 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Remove the AC power cord from the server. 4. Remove the chassis cover. For instructions, see "Removing the Chassis Cover" on page 24. 5. Remove the air duct. For instructions, see "Removing the Processor Air Duct" on page 68. 6. Remove the heatsink. For instructions, see "Removing a Heatsink" on page 77. 7. Push down on the lever attached to the processor socket. While holding the lever down, pull it towards the center of the board to disengage the lever from the hook. Fully open the lever. See Figure 79. AF000095 Figure 79. Opening Processor Socket Lever 8. Push down on the rear tab of the load plate to swing the front of the load plate up slightly. Fully open the load plate. See Figure 80. Figure 80. Opening Load Plate AF000415 74 Intel® Server System SC5400RA User's Guide
![](/manual_guide/products/intel-sc5400ra-user-guide-6ba0df6/96.png)