Intel SC5400RA User Guide - Page 131
Reverting to the Previous BIOS
UPC - 675900759336
View all Intel SC5400RA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Reverting to the Previous BIOS If you encounter a problem with your BIOS, you may want to revert to the previously installed BIOS. Because of the rolling BIOS feature, your workstation contains two versions of the BIOS: the current BIOS, and the BIOS that was previously installed. Note: If you upgrade the BIOS more than once with the same BIOS version, the two versions of the BIOS stored in your workstation will be identical. To revert to the previous BIOS: 1. Power down the workstation and disconnect the AC power. 2. Remove the chassis cover. For instrucstions, see "Removing the Chassis Cover" on page 24. 3. Locate the BIOS Bank Select jumper at board position J1C3. See Figure 110. 4. Move the jumper from the normal operation position, covering pins 2 and 3, to the Bank_0 position, covering pins 1 and 2, as shown by the diagram. BIOS Bank Select 2 3 J1C3 Force Lower Bank Normal Operation (default) AF001426 Figure 110. BIOS Bank Select Jumper in Force Lower Bank Position Intel® Server System SC5400RA User's Guide 109