Intel SC5400RA User Guide - Page 123
Removing Memory Riser Cage, Remote Management Module and the Intel
![]() |
UPC - 675900759336
View all Intel SC5400RA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
8. Reach in through the memory riser cage to disconnect the two power cables from the server board. If necessary, clip the wire tie that holds the two cables together. Use caution so you do not cut any of the cables. 9. Remove the two screws that secure the memory riser cage to the server system. See letter "A" in the figure below. 10. Lift the memory riser cage from the server system. See letter "B" in the figure below. A B AF001409 Figure 108. Removing Memory Riser Cage 11. Remove both processor heatsinks. For instructions, see "Removing a Heatsink" on page 77. 12. Remove each processor. For instructions, see "Removing a Processor" on page 74. 13. Remove each PCI add-in card. 14. Remove the Intel® Remote Management Module and the Intel® RMM NIC if they are installed. For instructions, see "Removing the Intel® RMM and the Intel® RMM NIC" on page 81. 15. Disconnect all remaining power and data cables from the server board. 16. Remove the eight screws that secure the server board to the chassis. 17. Lift the server board from the chassis. Intel® Server System SC5400RA User's Guide 101
![](/manual_guide/products/intel-sc5400ra-user-guide-6ba0df6/123.png)