Intel SC5400RA User Guide - Page 80
Removing PCI Add-in Card(s), Caution
UPC - 675900759336
View all Intel SC5400RA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Removing PCI Add-in Card(s) Caution: When removing a full-length add-in card, you must pull back the latch on the plastic card guide at the front of the server system to release the card from the card guide. 1. Observe the safety and ESD precautions in "Safety Information" on page 129. 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Disconnect the AC power cord from the server. 4. Remove the chassis cover. For instructions, see "Removing the Chassis Cover" on page 24. 5. Remove the front bezel if it is installed. For instructions, see "Removing and Installing the Front Bezel" on page 26. 6. Remove any cables attached to the add-in card, if necessary. 7. Press in on the two plastic tabs to release the PCI add-in card retainer from the server system. See letter "A" in the following figure. 8. Open the back panel PCI add-in card retention device by pulling it open from the inside of the system. See letter "B". 58 Intel® Server System SC5400RA User's Guide