Intel SC5400RA User Guide - Page 55
Removing Fixed Hard Drive(s), Removing Six-drive Fixed Drive Cage
![]() |
UPC - 675900759336
View all Intel SC5400RA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Removing Fixed Hard Drive(s) 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover" on page 24. 4. Remove the front bezel if it is installed. For instructions, see "Removing and Installing the Front Bezel" on page 26. 5. Remove the power and data cables from the hard drive connectors. 6. Optional: Remove the hard drive cage. The drives can be installed without removing the drive bay from the system. For clarity, the figures below show the installation process with the drive cage removed. If you find it easier to install the drives with the drive bay removed: - Push the blue plastic release mechanism upward to release the fixed drive cage. See letter "A" in the following figure. - Pull the drive cage from the system. See letter "B" in the figure below. - Position the drive bay horizontally before opening the drive cage doors. A B TP001490 Figure 25. Removing Six-drive Fixed Drive Cage 7. Loosen the thumb screw. See letter "A" in the following figure. 8. Open the upper door of the drive cage. See letter "B". Intel® Server System SC5400RA User's Guide 33
![](/manual_guide/products/intel-sc5400ra-user-guide-6ba0df6/55.png)