Intel SC5400RA User Guide - Page 132
Clearing the Password
UPC - 675900759336
View all Intel SC5400RA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
5. Install the chassis cover. For instructions, see "Installing the Chassis Cover" on page 25. 6. Reconnect the AC power and power up the server system. The BIOS will boot to the previous BIOS until you either move the jumper again or until you perform another BIOS update. Clearing the Password If the user or administrator password(s) is lost or forgotten, moving the password clear jumper into the "clear" position clears both passwords. The password clear jumper must be restored to its original position before a new password(s) can be set. 1. Power down the system. Leave the AC power cord connected. 2. Remove the chassis cover. For instrucstions, see "Removing the Chassis Cover" on page 24. 3. Locate the Password Clear jumper block at board position J1D2. See Figure 111. 4. Move the jumper from the normal operation position, covering pins 1 and 2, to the Password Clear position, covering pins 2 and 3, as shown by the diagram. 110 Intel® Server System SC5400RA User's Guide