Intermec CK71 70 Series Mobile Computer User Manual - Page 103

Chapter 6 - Configure the Computer About Serial and USB Communications You can use these 70 Series accessories to transmit data to and receive data from another device through serial or USB communications: • RS-232 Snap-On Adapter (Model 1000AA03) • USB Snap-On Adapter (Model 1000AA07) For more information about these accessories and how to order them, see "70 Series Accessories" on page 8. Connect to a Tethered Scanner Use this procedure to connect your mobile computer to an SR30, SR61T, or ASCII tethered scanner and enable RS-232 communications. 1 Tap Start > Settings > System > Intermec Settings > Communications > Serial Port Switch. 2 Select Standard docking and IrDA and tap OK. If the serial port switch is set to one of the other options, you need to select Standard docking and IrDA and then save and reboot the computer before you proceed. 3 Tap Back to return to the Main Menu. 4 Tap Data Collection > Dock Tethered Scanner > Enable scanner auto-detect. 5 Select the Enable scanner auto-detect check box and tap OK. 6 Perform one of these items based on the type of scanner you are connecting: • For an SR30 or SR61T scanner, tap Scanner Settings, select SR Intermec Scanner, and then tap OK. • For an ASCII scanner, tap Scanner Settings, select ASCII, and then tap OK. Set up the appropriate COM port settings by selecting Scanner Port Settings. 7 Connect the RS-232 snap-on adapter with the attached scanner to the bottom of the mobile computer. 70 Series Mobile Computer User Manual 89