Intermec CK71 70 Series Mobile Computer User Manual - Page 69

Chapter 3 - Use the Phone The carrier requires the Mobile Equipment Identifier (MEID) to start the activation process. You can find the MEID: • on a label located in the upper right corner of the battery compartment. • on the outside of the computer shipping box. • in the Version Information menu. Tap Start > Settings > Personal > Phone > Version Information tab. The activation process is slightly different for each CDMA carrier. Your carrier sales contact and an Intermec representative can guide you through the process. After you supply the MEID to your carrier, they will respond with values that you must enter using the Windows Mobile Activation Wizard (if required). Some of the supported carriers do not require you to enter any values. The following table shows the carriers, the correct activation method to use, and the values that you need to activate your phone. Values Required for CDMA Phone Carrier Sprint Verizon Activation Method Activation Wizard • Dial *22899 • Activation Wizard Activation Values You Need • Master Subsidy Lock (MSL) or activation code • MDN • MEID None. All parameters are automatically transferred wirelessly. After activation, the settings are permanently stored in the CDMA module. Changing the OS loads will not affect any of the settings or activation parameters stored in the WAN modem. Start the Activation Wizard Depending on your wireless carrier, you may need to use the Windows Mobile Activation Wizard to activate your phone. 1 Tap Start > Phone, or tap the Phone button on the Tile bar. The phone application starts. 2 Tap Menu > Activation Wizard. 70 Series Mobile Computer User Manual 55