Intermec CK71 70 Series Mobile Computer User Manual - Page 196

Appendix C - ScanNGo Wi-Fi Configuration Bar Codes Radio Configuration Bar Codes Use the following ScanNGo bar codes to enable the 802.11 radio and set the defaults for either Funk or Microsoft Wireless Zero Configuration security. After you scan the bar codes, you will still need to use Intermec Settings or another configuration program to set network-specific settings on your computer and to configure the wireless security. The CN70, CN70e, and CK70 are available with the EA30 imager only. The CK71 has three imager options: the EA30, EX25, or EV12 imager. If your CK71 has an EA30 or EX25 imager, use the 2D configuration bar codes to configure the radio. If your CK71 has an EV12 imager, use the 1D configuration bar codes to configure the radio. You can find out what imager is in your CK71 by opening Intermec Settings and tapping Data Collection > Internal Scanner > Scanner Settings. Note: If you are using Microsoft security, you can only use the 1D configuration bar codes. The following ScanNGo bar codes were created using SmartSystems. For more information on SmartSystems, see "Manage the Computer Using SmartSystems" on page 106. 182 70 Series Mobile Computer User Manual