Intermec CK71 70 Series Mobile Computer User Manual - Page 78

Chapter 4 - Use the Camera Setting Focus Focus Distance Description Determines if the focus is continuous, single shot, or manual. If you select manual focus, you need to set the Focus Distance. The distance at which the camera focuses. Values are 2.5 in, 4.5 in, 7.5 in, 1-3 ft, 3-9 ft, and Infinity (focuses the lens so that an infinitely distant object would be in focus). Advanced Camera Settings Setting Description Exposure The area of the image the camera uses to determine optimal Metering exposure: • Whole Avg.: Uses the image as a whole. • Whole Center Weight: Uses the entire image but places emphasis on the center quarter of the image. • Center 1/4 Avg.: Uses the center quarter of the image. • Lower 1/4 Avg.: Uses the lower quarter of the image. • Upper 1/4 Avg.: Uses the upper quarter of the image. • Lower 1/2 Avg.: Uses the lower half of the image. • Upper 1/2 Avg.: Uses the upper half of the image. Default is Center 1/4 Avg. Exposure Exposure level of the image. Values are from -2.5 (darker, underexposed) to +2.5 (lighter, overexposed) in increments of 0.5. Default is 0. Brightness Brightness level of the image. Manual settings are from -4 (very dark) to +4 (very light) in increments of 1. Default is Auto. Contrast Amount of contrast in the image. Manual settings are from -4 (least contrast) to +4 (most contrast) in increments of 1. Default is Auto. Saturation Color saturation level. Manual settings are from -4 (black and white) to +4 (maximum color) in increments of 1. Default is Auto. Sharpness Sharpness of the image. Manual settings are from -4 (very soft) to +4 (very sharp) in increments of 1. Default is Auto. 64 70 Series Mobile Computer User Manual