Intermec CK71 70 Series Mobile Computer User Manual - Page 158
Default Configuration, Data Collection Settings
View all Intermec CK71 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Appendix A - Specifications and Default Settings EX25 2D Symbologies Typical Reading Distances with 0.24 cm (0.09 in) Setback Symbology Density Minimum Distance Maximum Distance DataMatrix 0.25 mm (10 mils) 15 cm (5.91 in) 0.76 mm (30 mils) 25 cm (9.84 in) 1.4 mm (55 mils) ** 2.5 mm (100 mils) ** 7.5 mm (300 mils) 20 cm (7.87 in) 90 cm (35.43 in) 310 cm (122.05 in) 450 cm (177.17 in) 1100 cm (433.07 in) 1524 cm (600 in) ** Minimum distance depends on bar code width and scan angle. Default Configuration The following tables list the default values of the configuration settings supported on the mobile computer. If you restore the mobile computer to factory default settings, the mobile computer uses these values. The settings are grouped by function and reflect the organization of Intermec Settings. Not all of the configuration settings are listed in this appendix. For detailed information on most of the settings, see the Intermec Settings Command Reference Manual. Data Collection Settings Use data collection settings to configure the imager and to configure the bar codes that you want the imager to be able to read. Data Collection Settings Data Collection Setting Enable Scanner/Camera Port BT-Configure On Connect Enable Magstripe Reader Default Value On Overwrite with computer settings Disable 144 70 Series Mobile Computer User Manual