Intermec CK71 70 Series Mobile Computer User Manual - Page 149

Appendix A - Specifications and Default Settings Supported Bar Code Symbologies (Continued) GS1 DataBar Expanded GS1 DataBar Limited Telepen TLC 39* * These symbologies are not supported with the EV12 imager in the CK71. Imager Reading Distances Typical reading distances are done in an office environment using office lights (4 lux). Minimum distances are measured in the dark (0 lux). Both reading distances are provided in respective scan engine integration guides. Contact your local Intermec representative for more information. Below are the typical and minimum standard reading distances for the 70 Series computer built with an EA30 imager. Also included are typical and minimum standard reading distances for the CK71 with an EV12 or EX25 imager. Note: Minimum distances depend on the length of the bar code. EA30 Typical Reading Distances - Extended Reading Range These typical reading distances are measured in an office environment (250 lux) for the EA30 standard model with Extended Reading Range activated. Extended Reading Range is enabled by default. 70 Series Mobile Computer User Manual 135