Intermec CK71 70 Series Mobile Computer User Manual - Page 112

Chapter 6 - Configure the Computer Use Open (No Security) Associations with Funk Use the following procedure to configure your mobile computer for open security using Funk. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Funk Security. 3 Select the active profile you are using. 4 For Association, select Open. 5 For Encryption, select None. 6 Tap OK. Your settings are saved. Select Microsoft as Your Security Choice The default security setting is Funk. If you want to use Microsoft Wireless Zero Configuration (WZC) security, you need to select it as your security choice. After you select Microsoft as your security choice, you will be prompted to save your settings and reset the computer for your change to take effect. With Microsoft as your security choice, you can configure: • WPA or WPA2 • 802.1x • Static WEP Select Microsoft Security Use the following procedure to select Microsoft security. 1 Start Intermec Settings. For help, see "Start Intermec Settings" on page 75. 2 Select Communications > 802.11 Radio > Security Choice. 3 From the Security Choice list, select Microsoft Security. An alert box appears telling you that you must save your settings and reboot the computer for the new security choice to take effect. 4 Select Yes. The computer resets and starts with Microsoft Security as the Security Choice. 98 70 Series Mobile Computer User Manual