Kodak 5300 User Guide - Page 77

Printhead, Calibration - printhead replacement

Page 77 highlights

6 Slide the ink cartridge into the printhead. Maintenance 7 Press down on the tab until you hear a click and feel the latch snap into position. 8 Close the printer access door. Printhead The printhead dispenses the ink from the ink cartridges onto the paper. Printer maintenance involves: „ Calibration „ Clean the printhead Calibration The Kodak EasyShare AiO performs a calibration every time you install or replace a printhead. However, you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads and performs a nozzle health check to enable high-quality prints. To calibrate from computer 1 Load the main tray or photo tray with photo paper. IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly recommended for calibrations. 2 Start the AiO Home Center. 3 Click to open the Help panel. 4 Under General Links, click Maintenance. 5 Click Calibration to make a calibration print. 6 Follow the instructions on the calibration print to calibrate the printer. User's Guide 73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

Maintenance
6
Slide the ink cartridge into the printhead.
7
Press down on the tab until you hear a click and feel the latch snap into position.
8
Close the printer access door.
Printhead
The printhead dispenses the ink from the ink cartridges onto the paper. Printer maintenance involves:
Calibration
Clean the printhead
Calibration
T
he Kodak EasyShare AiO performs a calibration every time you install or replace a printhead. However,
you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads
and performs a nozzle health check to enable high-quality prints.
To calibrate from computer
1
Load the main tray or photo tray with photo paper.
IMPORTANT:
If you don't have any photo paper, you can use plain paper, but photo paper is highly
recommended for calibrations.
2
Start the AiO Home Center.
3
Click
to open the Help panel.
4
Under
General Links
, click
Maintenance
.
5
Click
Calibration
to make a calibration print.
6
Follow the instructions on the calibration print to calibrate the printer.
User’s Guide
73