Konica Minolta SL1000 Digital Film Scanner SL1000 User Guide - Page 89
When the 16/35mm Roll FilmOpen-Reel is used.
View all Konica Minolta SL1000 Digital Film Scanner manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 4 Operation When the 16/35mm Roll Film(Open-Reel) is used. 16/35mm Roll Film (open-reel) can be used with the A type cartridge adaptor installed. 1 Mount the 16mm or 35mm Film (Open-Reel) onto the Reel Shaft in the figure below and unwind the Leading Edge of the Film. 2 Insert the film between the upper and lower fiche glass. NOTE ! Set the film as shown in the figure below. CAUTION ・ Do not set it in a counterclockwise rolling so that the film surface might get the wound. 3 Insert the Leading Edge of the Film into the slit in the take-up reel and rotate the take-up reel two to three turns so that the Film Leader is wound around the take-up reel. 4 Operate the Fiche Carrier, and rewind the film to an image lead position. 4-17
Chapter 4 Operation
4-17
When the 16/35mm Roll Film(Open-Reel) is used.
16/35mm Roll Film (open-reel) can be used with the A type cartridge adaptor installed.
1
Mount the 16mm or 35mm Film (Open-Reel) onto the Reel Shaft in the figure below and
unwind the Leading Edge of the Film.
2
Insert the film between the upper and lower fiche glass.
NOTE
!
Set the film as shown in the figure below.
CAUTION
・
Do not set it in a counterclockwise rolling so that the film surface might get the wound.
3
Insert the Leading Edge of the Film into the slit in the take-up reel and rotate the take-up
reel two to three turns so that the Film Leader is wound around the take-up reel.
4
Operate the Fiche Carrier, and rewind the film to an image lead position.