Konica Minolta bizhub 160 Service Manual - Page 123
Footer, Select Tray
View all Konica Minolta bizhub 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
bizhub 160/160f bizhub 161/161f 10. Utility Mode (bizhub 160f/bizhub 161f) Field Service Ver. 1.0 Apr. 2005 G. FOOTER Functions / Use • This function can be used to set whether or not the reception information (RX data and time, RX management number, RX page number, Transmitter's ID) is printed at the bottom of each received document. Setting/Procedure • The default setting is "OFF." ON : Add footer "OFF" : No footer • Attaching footer print: When Footer is selected ON, it is printed at the end of printable area. 4mm line area from the end of printable area is kept for printing Footer. It should be attached on Footer area regardless of image length. If the received image is divided into 2 pages or more, Footer is printed in the specified location of all the recording sheets of paper printed. • Image data area: The received image data is printed on the area except for 12mm from recording paper size. (No printable area: 8mm (1/3 in) + Footer area: 4mm (1/4 in)) The following table is the image printable area of each recording paper size due to setting of Footer Print. Paper length A4 Letter Legal 297 mm 279 mm 356 mm Footer off Image data area 289 mm 271 mm 348 mm Footer on Image data area Footer area 285 mm +4 mm (1/4 in) 267 mm +4 mm (1/4 in) 344 mm +4 mm (1/4 in) H. SELECT TRAY Functions / Use • This function can be used to select which paper tray can be used to supply paper when printing received documents or transmission reports. (A paper tray that cannot be used for supplying paper can also be specified.) • This function is only available when an optional paper tray is installed. Setting/Procedure • The default setting is "Enable." Tray1 : "Enable" Disable Tray2 : "Enable" Disable • A non-equipped cassette is not displayed. When setting value is determined, reception setting of utility menu is indicated. This setting has effect on RX print and Report print. Adjustment / Setting 90