Konica Minolta bizhub 160 Service Manual - Page 127
Network Setting, Ip Address, Subnet Mask
View all Konica Minolta bizhub 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
bizhub 160/160f bizhub 161/161f 10. Utility Mode (bizhub 160f/bizhub 161f) Field Service Ver. 1.0 Apr. 2005 10.2.15 NETWORK SETTING • Depending on the network environment in which the machine is located, there may be some restrictions on the network functions that the machine can use. Make the network settings to suit the functions and environment required for customer's location. The network settings can be specified from the control panel or using the administrator mode of Page Scope Web Connection. A. IP ADDRESS Functions / Use • This function is used to specify the IP address for the copier. NOTE • Available only if the NIC NC-501 is installed. • Please consult customer's network administrator for information about the IP address to use. Setting/Procedure • The default setting is "AUTO." "AUTO" SPECIFY • If "AUTO" is selected, the IP address is automatically acquired from the DHCP server. NOTE • AUTO is only enabled if there is a DHCP server available on the network. • When IP address cannot be acquired from the DHCP server, IP address is acquired by the "Auto-IP function." • When AUTO is selected, there is no need to set the subnet mask or gate- way setting. When using a fixed IP address, IP Address in NVRAM must be selected for Page Scope Web Connection. • Select this option from the "TCP/IP Configuration" menu on the "Network" tab. • If SPECIFY is selected, the screen for entering the IP address appears. B. SUBNET MASK Functions / Use • This function is used to specify the subnet mask value for the network. NOTE • Available only if the NIC NC-501 is installed. • Please consult customer's network administrator for information about the subnet mask to use. Setting/Procedure • Setting LAN connect to WAN the net mask address. NOTE • If Auto is selected for "1 IP Address/Auto," the items of "2 Subnet mask" and "3 Gateway" are automatically set. Key entry is therefore disabled for "2 Subnet mask" and "3 Gateway." Adjustment / Setting 94