Konica Minolta bizhub 160 Service Manual - Page 366
step 5: Flash ROM write OK
View all Konica Minolta bizhub 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
NC-501/SU-502 Field Service Ver. 1.0 Apr. 2005 3. Firmware upgrade 17. Input "type flash". C:\>type flash 18. Check that the firmware has been updated properly using the following messages that should appear. step 1: Command format is correct step 2: Program's header is right step 4: Flash ROM erase OK step 5: Flash ROM write OK step 6: Program complete 19. Input "exit", and then press the "Enter" key. C:\>exit 20. Check that you exit the [MS-DOS prompt] or [Command prompt] of PC. 21. Delete the "flash" file created in drive C of the PC. 22. Press the main power switch for the copier OFF/ON to restart the copier. C:\>ftp XXX.XXX.XXX.XXX Connected to XXX.XXX.XXX.XXX 220 NET+ARM FTP SERVER X.X ready USER(XXX.XXX.XXX.XXX:(none)): 230 User none logged in. ftp>bin 200 Type set to I. ftp>put X:\XXX.bin 200 PORT command OK. 150 About to open data connection. 226 Transfer complete ftp: xxxbytes sent in xxxSeconds xxxKbytes/sec. ftp>get flash 200 PORT command OK. 150 About to open data connection. 226 Transfer complete. ftp: xxxbytes received in xxxSeconds xxxKbytes/sec. ftp>quit 221 Goodbye C:\>type flash step 1 : Command format is correct step 2 : Program's header is right step 4 : Flash ROM erase OK step 5 : Flash ROM write OK step 6 : Program complete C:\>exit Maintenance 7