Konica Minolta bizhub 160 Service Manual - Page 362
Removal of the Network Interface Card
View all Konica Minolta bizhub 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 362 highlights
NC-501/SU-502 Field Service Ver. 1.0 Apr. 2005 Maintenance 2. Other 2.1 Disassembly/Assembly list (Other parts) 2. Other No Section 1 Board 2 3 Option NC-501 SU-502 Part name Network Interface Card (PWB-NIC) Plate NIC Board (NIC-IF) Internet Fax & Network Scan Kit Ref. page ☞3 ☞4 ☞5 2.2 Disassembly/Assembly procedure NOTE • When removing a circuit board, refer to the precautions for handling printed circuit boards and follow the corresponding removal procedures. • The following removal procedures omit the removal of the applicable component from connectors and circuit board supports. • When it is necessary to touch ICs and other electrical components on the circuit board, be sure to first ground yourself. 2.2.1 Network Interface Card (NC-501) A. Removal of the Network Interface Card 1383U004AB 1. Turn OFF the Power Switch and unplug the power cord from the power outlet. 2. Remove the Rear Cover. (5 screws) NOTE Use the following precautions when installing the Rear Cover. • Make sure that the cover is posi- tively placed inside the guide (Top and bottom). • Make sure that the cover is properly doweled into the frame. Maintenance 1383U009AB 4980D501AA 3. Disconnect hookup connector P303 of the PCL Board. 4. Disconnect hookup connector P401 of the Net work Interface Card. NOTE Applicable to the Copier (PCL) and Fax (PCL) machine only. 3