Konica Minolta bizhub 160 Service Manual - Page 56
Procedure for Upgrading the Firmware - scanner drivers
View all Konica Minolta bizhub 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
bizhub 160/160f bizhub 161/161f Field Service Ver. 1.0 Apr. 2005 5. Firmware upgrade 5. Select "Specify a location", and then click the [Browse...] button. 6. Specify "\Corresponding_language\Win9X" on the CD-ROM, and then click the [OK] button. 7. Click the [OK] button, and then continue following the instructions in the dialog boxes that appear until the "Completing the Found New Hardware Wizard" dialog box appears. 8. Click the [Finish] button. 9. When the "Found New Hardware Wizard" dialog box appears again, repeat steps 4 through 8 to install all drivers. 5.2.2 Procedure for Upgrading the Firmware (Engine firmware/ Copier firmware/ FAX firmware/ PCL firmware) NOTE • The engine firmware, Copier firmware, FAX firmware and PCL firmware can be upgraded by using the following procedure. • For the upgrading procedure of NIC firmware, see "NIC NC-501 Upgrading the Firmware." 1. Turn on the printer. 2. Start up the host computer (Windows 98 or later). 3. Copy the "Update Software" folder and "Update" file to drive C. (Copy them into the highest directory on drive C.) 4. Use a USB cable to connect the printer to the host computer. (Wait until the hardware is detected.) 5. Display the "System Properties" dialog box ("Properties" for "My Computer"), click the "Hardware" tab, click the [Device Manager] button, select "Imaging devices", and then check that "KONICA MINOLTA 160 scanner" has been added. Maintenance 4980D045AA 6. Double-click "Update" file in the "Update Software" folder. The "A3S/A4S Update F/W-VX.XX" dialog box appears. 4980D047AA 4980f2e001aa 23