Lenovo ThinkCentre A70 Hardware Maintenance Manual for ThinkCentre A70 - Page 130
Reinstall the computer cover.
View all Lenovo ThinkCentre A70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Figure 65. Removing the six screws that secure the system board 10. Lift the system board out of the chassis. 11. Remove the microprocessor from the failing system board and install it on the new system board. See "Replacing the microprocessor" on page 113. 12. Install the new system board into the chassis by aligning the six mounting studs in the chassis with the corresponding holes in the new system board. Then, install the six screws to secure the system board. 13. Install the heat sink and fan assembly and connect the heat sink and fan assembly cable to the new system board. See "Replacing the heat sink and fan assembly" on page 110. 14. Install all memory modules and PCI cards removed from the failing system board on the new system board. See "Installing or replacing a memory module" on page 107 and "Installing or replacing a PCI card" on page 105. 15. Reconnect all remaining cables to the system board. See "Locating parts on the system board" on page 99. 16. Lower the drive bay assembly. See "Accessing the system board components and drives" on page 104. 17. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on page 102. 18. Reinstall the computer cover. 19. Go to "Completing the parts replacement" on page 132. The failing system board must be returned with a microprocessor socket cover to protect the pins during shipping and handling. To install the microprocessor socket cover: 1. Remove the microprocessor from the microprocessor socket. See "Replacing the microprocessor" on page 113. 2. Close the microprocessor retainer and lock it into position with the small handle. 124 ThinkCentre Hardware Maintenance Manual