Lenovo ThinkCentre A70 Hardware Maintenance Manual for ThinkCentre A70 - Page 83
module is aligned with the key, in the memory slot. Then, press the new memory module straight down
View all Lenovo ThinkCentre A70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
• If you are replacing a memory module, open the retaining clips and remove the old memory module that is currently installed. Figure 12. Removing the memory module • If you are installing a memory module, open the retaining clips of the memory slot into which you want to install the memory module. Figure 13. Opening the retaining clips of the memory slot 7. Position the new memory module over the memory slot. Make sure that the notch 1 on the new memory module is aligned with the key 2 in the memory slot. Then, press the new memory module straight down into the memory slot until the retaining clips close and the new memory module snaps into position. Chapter 8. Replacing FRUs (Machine Types: 0864, 7099, and 7846.) 77
•
If you are replacing a memory module, open the retaining clips and remove the old memory module
that is currently installed.
Figure 12. Removing the memory module
•
If you are installing a memory module, open the retaining clips of the memory slot into which you
want to install the memory module.
Figure 13. Opening the retaining clips of the memory slot
7. Position the new memory module over the memory slot. Make sure that the notch
1
on the new memory
module is aligned with the key
2
in the memory slot. Then, press the new memory module straight down
into the memory slot until the retaining clips close and the new memory module snaps into position.
Chapter 8
.
Replacing FRUs (Machine Types: 0864, 7099, and 7846.)
77