Lenovo ThinkCentre M76 Hardware Maintenance Manual for ThinkCentre M76 - Page 101
to release the microprocessor
View all Lenovo ThinkCentre M76 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
4. Locate the system board and disconnect all cables connected to the system board. See "Locating parts on the system board" on page 76. 5. Remove the heat sink and fan assembly. See "Replacing the heat sink and fan assembly" on page 94. Note: Place the heat sink and fan assembly on its side so that the thermal grease on the bottom of it does not get in contact with anything. 6. Lift the small handle 1 to release the microprocessor 2 secured on the system board. Figure 30. Accessing the microprocessor 7. Lift the microprocessor straight up and out of the microprocessor socket. Figure 31. Removing the microprocessor Notes: a. Your microprocessor and socket might look different from the one illustrated. Chapter 8. Replacing FRUs (Machine Types: 3114, 3121, 3123, and 3127.) 97