Lenovo ThinkCentre M76 Hardware Maintenance Manual for ThinkCentre M76 - Page 94
Replacing the card reader
View all Lenovo ThinkCentre M76 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Replacing the card reader To replace the card reader, do the following: 1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Remove the computer cover. See "Removing the computer cover" on page 78. 3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 79. 4. Locate the card reader. See "Locating components" on page 75. 5. Disconnect the card reader cable from the USB connector on the system board. See "Locating parts on the system board" on page 76. 6. Press the blue retaining clip to remove the card reader out of the chassis. Figure 22. Removing the card reader 7. Install the card reader retainer on the side of the new card reader. Figure 23. Installing the card reader retainer 90 ThinkCentre Hardware Maintenance Manual