Lenovo ThinkCentre M76 Hardware Maintenance Manual for ThinkCentre M76 - Page 93
Slide the card reader with retainer into the card reader drive bay until it snaps into position.
View all Lenovo ThinkCentre M76 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
7. Slide the card reader with retainer into the card reader drive bay until it snaps into position. Figure 20. Installing the card reader 8. Connect the card reader cable to Front USB connector 2 on the system board. See "Locating parts on the system board" on page 76. 9. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on page 79. Note: You might have to remove the card reader cover 2 from the front bezel. To remove the card read cover, pivot the two retaining clips 1 that secure the card reader cover outwards and then completely disengage the card reader cover from the front bezel. Figure 21. Removing the card reader cover 10. To complete the installation or replacement, go to "Completing the parts replacement" on page 110. Chapter 8. Replacing FRUs (Machine Types: 3114, 3121, 3123, and 3127.) 89