Lenovo ThinkCentre M76 Hardware Maintenance Manual for ThinkCentre M76 - Page 53
Diagnostic Error Code, System Device Buffer Allocation failure
View all Lenovo ThinkCentre M76 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Diagnostic Error Code 000-197-XXX BIOS test warning 000-198-XXX BIOS test aborted 000-199-XXX BIOS test failed, cause unknown 000-250-XXX BIOS APM failure 000-270-XXX BIOS ACPI failure 001-000-XXX System Test Passed 001-00X-XXX System Error 001-01X-XXX System Error 001-024-XXX System Addressing test failure 001-025-XXX System Checksum Value error 001-026-XXX System FLASH data error 001-027-XXX System Configuration/Setup error 001-032-XXX System Device Controller failure 001-034-XXX System Device Buffer Allocation failure 001-035-XXX System Device Reset condition detected 001-036-XXX System Register error FRU/Action 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 43 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 43 2. Flash the system and retest. See "Updating (flashing) the BIOS from a disc" on page 201 3. Go to "Undetermined problems" on page 69 1. Go to "Undetermined problems" on page 69 2. Flash the system and re-test 3. Replace component under function test 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 201 2. System board 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 201 2. System board No action System board System board System board 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 201 2. System board 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 201 2. System board 1. Run Setup 2. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 201 3. System board System board 1. Reboot the system 2. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 201 3. Run memory test 4. System board System board System board Chapter 7. Symptom-to-FRU index 49