Lexmark MS911 User's Guide - Page 104

Understanding the printer menus Use Timeouts Hibernate Timeout Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month Timeouts Hibernate Timeout on Connection Do Not Hibernate Hibernate Timeouts Screen Timeout 15-300 sec Timeouts Prolong Screen Timeout On Off Timeouts Print Timeout Disabled 1-255 sec Timeouts Wait Timeout Disabled 15-65535 sec 104 To Set the amount of time before the printer enters Hibernate mode. Note: 3 days is the factory default setting. Set the printer to Hibernate Timeout even when there is an active Ethernet connection. Note: Hibernate is the factory default setting. Set the amount of time in seconds the printer waits before returning to Ready state. Note: 30 sec is the factory default setting. Set the printer to continue a specified job without returning to the home screen when the screen timeout timer expires. Note: Off is the factory default setting. Set the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the rest of the print job. Notes: • 90 sec is the factory default setting. • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting. • Print Timeout is available only when using PCL emulation. This setting has no effect on PostScript emulation print jobs. Set the amount of time in seconds the printer waits for additional data before canceling a print job. Notes: • 40 sec is the factory default setting. • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL emulation print jobs.