Lexmark MS911 User's Guide - Page 252

Index 252 streaked vertical lines 227 toner fog or background shading appears on prints 228 toner rubs off 229 toner specks appear on prints 229 transparency print quality is poor 230 uneven print density 230 white streaks 230 print quality, troubleshooting cleaning the charger 129 cleaning the printhead lens 129 Print Settings menu 106 print troubleshooting envelope seals when printing 207 error reading flash drive 207 held jobs do not print 206 incorrect characters print 208 incorrect margins on prints 216 jammed pages are not reprinted 204 job prints from wrong tray 208 job prints on wrong paper 208 jobs do not print 211 Large jobs do not collate 209 multiple‑language PDF files do not print 209 paper curl 217 paper frequently jams 205 print job takes longer than expected 210 tray linking does not work 212 unexpected page breaks occur 212 printer 40 basic model 10 connecting to an outlet 9 fully configured 10 minimum clearances 9 moving 9, 157 selecting a location 9 shipping 157 printer configurations 10 printer control panel adjusting brightness 124 indicator light 13 Sleep button light 13 Printer had to restart. Last job may be incomplete. 193 printer hard disk disposing of 126 encrypting 128 installing 28 removing 32 printer hard disk encryption 128 printer hard disk memory erasing 127 printer information where to find 8 printer IP address finding 17 printer is printing blank pages 222 printer messages [x] maintenance kit very low [80.xy] 192 [x]‑page jam, clear manual feeder. [200.xx] 162 [x]‑page jam, detach the 3000‑sheet tray and open door F. [24y.xx] 170 [x]‑page jam, open door C and clear all jammed media. [2yy.xx] 163 [x]‑page jam, open door D and clear all jammed media. [24y.xx] 167 [x]‑page jam, open door H and rotate knob H6 clockwise. Leave paper in bin. [426.xx- 428.xx] 180 [x]‑page jam, open doors G, H, and J and clear jammed paper. Leave paper in bin. [400-402] 172 [x]‑page jam, press latch to access area G and clear jammed staples. Leave paper in bin. [402.93] 178 [x]‑page jam, press latch to access area G. Leave paper in bin. [40y.xx] 176 [x]‑page jam, slide the 3000‑sheet tray and open door C. [2yy.xx] 165 [x]‑page jam, slide the 3000‑sheet tray and open door D. [24y.xx] 168 Cartridge low [88.xy] 186 Cartridge nearly low [88.xy] 186 Cartridge very low [88.xy] 186 Change [paper source] to [custom string] load [orientation] 186 Change [paper source] to [custom type name] load [orientation] 186 Change [paper source] to [paper size] load [orientation] 186 Change [paper source] to [paper type] [paper size] load [orientation] 187 Close door [x] 187 Complex page, some data may not have printed [39] 187 Configuration change, some held jobs were not restored [57] 187 Defective flash detected [51] 187 Disk full [62] 188 Disk must be formatted for use in this device 188 Disk near full. Securely clearing disk space. 188 Empty the hole punch box 188 Error reading USB drive. Remove USB. 188 Error reading USB hub. Remove hub. 188 Incorrect paper size, open [paper source] [34] 188 Insert hole punch box 189 Insert Tray [x] 189 Insufficient memory for Flash Memory Defragment operation [37] 189 Insufficient memory to collate job [37] 189 Insufficient memory to support Resource Save feature [35] 189 Insufficient memory, some Held Jobs were deleted [37] 189 Insufficient memory, some held jobs will not be restored [37] 189 Insufficient space between paper stacks in Tray 3 190 Load [paper source] with [custom string] [paper orientation] 190 Load [paper source] with [custom type name [paper orientation] 190 Load [paper source] with [paper size] [paper orientation] 190 Load [paper source] with [paper type] [paper size] [paper orientation] 190 Load Multipurpose Feeder with [custom string] [paper orientation] 190