Lexmark MS911 User's Guide - Page 58
Storing paper, Supported paper sizes, types, and weights, Paper sizes supported by the printer
View all Lexmark MS911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Paper and specialty media guide 58 For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link. Storing paper Use these paper storage guidelines to help avoid jams and uneven print quality: • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18-24°C (65-75°F) with relative humidity between 40 and 60 percent. • Store paper in cartons, on a pallet or shelf, rather than on the floor. • Store individual packages on a flat surface. • Do not store anything on top of individual paper packages. • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat. Supported paper sizes, types, and weights The following tables provide information on standard and optional paper sources and the sizes, types, and weights of paper they support. Note: For an unlisted paper size, select the closest larger listed size. Paper sizes supported by the printer Paper size Dimensions Standard Standard 2 x 500‑ 2500‑sheet 3000‑sheet Multipurpose Two‑sided 500‑sheet 500‑sheet sheet tray tray feeder3 printing tray (Tray tray (Tray tray 1) 2) A4 210 x 297 mm (8.3 x 11.7 in.) 2 2 2 A5 148 x 210 mm (5.8 x 8.3 in.) 1 1 1 X X A6 105 x 148 mm X X X X X 1 (4.1 x 5.8 in.) JIS B5 182 x 257 mm (7.2 x 10.1 in.) X X Letter 216 x 279 mm (8.5 x 11 in.) 2 2 1 Supported only in short‑edge orientation. 2 Supported only in long‑edge orientation. 3 Supports paper size without size sensing. 4 Supported only if the width is from 139.7 mm (5.5 in.) to 320 mm (12.6 in.), and the length is from 148 mm (5.83 in.) to 458 mm (18 in.). Note: Banner is supported in the multipurpose feeder only if the width is up to 296.9 mm (11.69 in.) and the length is up to 1219.2 mm (48 in.). Set the paper size to Universal.