Lexmark MS911 User's Guide - Page 83
Reports menu, Network Card menu, Network/Ports, Standard Network, Reports, Network [x] - mac address
View all Lexmark MS911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Understanding the printer menus 83 Use Mac Binary PS On Off Auto Standard Network Setup OR Network [x] Setup Reports Network Card TCP/IP IPv6 Wireless AppleTalk To Set the printer to process Macintosh binary PostScript print jobs. Note: Auto is the factory default setting. Show and set the printer network settings. Note: The Wireless menu appears only when the printer is connected to a wireless network. Reports menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Reports • Network/Ports > Network [x] > Network [x] Setup > Reports Use To Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address. Network Card menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Network Card • Network/Ports > Network [x] > Network [x] Setup > Network Card Use To View Card Status Connected Disconnected View the connection status of the wireless network adapter. View Card Speed View the speed of an active wireless network adapter. Network Address UAA LAA View the network addresses. Job Timeout 0, 10-225 seconds Set the amount of time it takes for a network print job to be canceled. Notes: • "90 seconds" is the factory default setting. • A setting value of 0 disables the timeout. • If a value between 1 and 9 is selected, then Invalid appears on the display, and the value is not saved.