Lexmark MS911 User's Guide - Page 199
Unsupported option in slot [x] [55], Waste toner bottle nearly full [82.xy]
View all Lexmark MS911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Troubleshooting 199 Unsupported option in slot [x] [55] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the unsupported option card from the printer controller board, and then replace it with a supported card. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. Waste toner bottle nearly full [82.xy] You may need to order a waste toner bottle. If necessary, touch Continue on the printer control panel to clear the message and continue printing. Weblink server not set up. Contact system administrator. From the printer control panel, touch Continue to clear the message. Note: If the message appears again, then contact your system support person. Solving printer problems Basic printer problems The printer is not responding Action Step 1 Make sure the printer is turned on. Yes Go to step 2. No Turn on the printer. Is the printer turned on? Step 2 Check if the printer is in Sleep mode or Hibernate mode. Is the printer in Sleep mode or Hibernate mode? Step 3 Check if one end of the power cord is plugged into the printer and the other to a properly grounded electrical outlet. Is the power cord plugged into the printer and a properly grounded electrical outlet? Press the Sleep button to wake the printer from Sleep mode or Hibernate mode. Go to step 3. Go to step 4. Plug one end of the power cord into the printer and the other to a properly grounded electrical outlet.