Lexmark MS911 User's Guide - Page 192
Load staples [G11, G12], [x] maintenance kit very low [80.xy], Memory full [38]
View all Lexmark MS911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Troubleshooting 192 Load staples [G11, G12] Try one or more of the following: • Replace or insert the staple cartridge into the finisher. For instructions on replacing or inserting the staple cartridge into the finisher, touch More information on the control panel. • From the control panel, touch Continue to clear the message and continue printing. • Cancel the print job. [x] maintenance kit very low [80.xy] You may need to replace the maintenance kit very soon. For more information, go to the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message. If necessary, touch Continue to clear the message and continue printing. Memory full [38] Try one or more of the following: • From the control panel, touch Cancel job to clear the message. • Touch Reset active bin to reset the active bin for a linked set of bins. • Install additional printer memory. Network [x] software error [54] Try one or more of the following: • From the printer control panel, touch Continue to continue printing. • Turn off the printer, wait for about 10 seconds, and then turn the printer back on. • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at http://support.lexmark.com. Not enough free space in flash memory for resources [52] Try one or more of the following: • From the control panel, touch Continue to clear the message and continue printing. • Touch Reset active bin to reset the active bin for a linked set of bins. • Delete fonts, macros, and other data stored in the flash memory. • Install a flash memory card with larger capacity. Note: Downloaded fonts and macros not previously stored in the flash memory are deleted. Open door H and remove paper from beneath area H10 Remove the paper from the specified area.