Lexmark MX417 User Guide - Page 144
IPv6 menu, Wireless menu, Network/Ports, Standard Network, Network [x], Network [x] Setup, Wireless
View all Lexmark MX417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Understanding the printer menus 144 IPv6 menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > IPv6 • Network/Ports > Network [x] > Network [x] Setup > IPv6 Note: This menu is available only in network printers or printers that are attached to print servers. Use To Enable IPv6 On Off Enable IPv6 in the printer. Note: On is the factory default setting. Auto Configuration On Off Specify whether or not the wireless network adapter accepts the automatic IPv6 address configuration entries provided by a router. Note: On is the factory default setting. View Hostname View Address View Router Address Set the host name. Note: These settings can be changed only from the Embedded Web Server. Enable DHCPv6 On Off Enable DHCPv6 in the printer. Note: On is the factory default setting. Wireless menu Note: This menu is available only in printers connected to an Ethernet network and printers with a wireless network adapter attached. To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Wireless • Network/Ports > Network [x] > Network [x] Setup > Wireless Use Wi‑Fi Protected Setup (WPS) Start Push Button Method Start PIN Method Enable/Disable WPS Auto‑detection Enable Disable To Establish a wireless network connection and enable network security. Notes: • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time. • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point. Automatically detect the connection method that an access point with WPS uses-Start Push Button Method or Start PIN Method. Note: Disable is the factory default setting.