Lexmark MX417 User Guide - Page 170

Understanding the printer menus 170 Use Sides (Duplex) Off On Separator Sheets Off Before Job After Job Separator Sheet Source Tray [x] Multipurpose Feeder Fax Footer On Off Max Speed 2400 4800 9600 14400 33600 Fax Forwarding Print Print and Forward Forward Forward to Fax E‑mail FTP LDSS eSF Forward to Shortcut Block No Name Fax Off On Banned Fax List To Enable two‑sided printing for incoming fax jobs. Notes: • Off is the factory default setting. • This menu item appears only when a duplex unit is installed. Enable the printer to include separator sheets for incoming fax jobs. Note: Off is the factory default setting. Specify the paper source for the separator sheet. Note: Tray 1 is the factory default setting. Print the transmission information at the bottom of each page from a received fax. Note: Off is the factory default setting. Specify the maximum speed in baud at which faxes are received. Note: 33600 is the factory default setting. Enable forwarding of received faxes to another recipient. Note: Print is the factory default setting. Specify the type of recipient to which faxes are forwarded. Notes: • Fax is the factory default setting. • This menu item is available only from the Embedded Web Server. Enter the shortcut number that matches the recipient type (Fax, E-mail, FTP, LDSS, or eSF). Enable blocking of incoming faxes sent from devices with no station ID or fax ID specified. Note: Off is the factory default setting. Enable the list of blocked fax numbers stored in the printer.