Lexmark MX417 User Guide - Page 157

Understanding the printer menus Use Timeouts Standby Mode Disabled 1-240 Timeouts Sleep Mode Disabled 1-120 Timeouts Print with Display Off Allow printing with display off Display on when printing Timeouts Hibernate Timeout Disabled 20 minutes 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month Hibernate Timeout on Connection Hibernate Do Not Hibernate Timeouts Screen Timeout 15-300 Timeouts Print Timeout Disabled 1-255 157 To Set the idle time before the printer enters a lower power state. Note: 15 minutes is the factory default setting. Set the idle time before the printer begins operating in Sleep mode. Notes: • 20 minutes is the factory default setting. • Disabled appears only when Energy Conserve is set to Off. Print a job with the display turned off. Note: Display on when printing is the factory default setting. Set the time before the printer enters Hibernate mode. Note: 3 days is the factory default setting. Set the printer to Hibernate mode even if there is an active Ethernet connection. Note: Do Not Hibernate is the factory default setting. Set the idle time before the display automatically returns to Ready state. Note: 30 seconds is the factory default setting. Set the printer to end a print job after it has been idle for the specified amount of time. Notes: • 90 seconds is the factory default setting. • Print Timeout is available only when using PCL emulation.