Lexmark MX417 User Guide - Page 239

Troubleshooting 239 Maintenance kit nearly low [80.xy] For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message. If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. Maintenance kit very low [80.xy] You may need to replace the maintenance kit very soon. For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. Memory full [38] Try one or more of the following: • From the printer control panel, select Cancel job to clear the message. For non‑touch‑screen printer models, press to confirm. • Install additional printer memory. Memory full, cannot print faxes From the control panel, do either of the following: • Touch Continue holding faxes without printing to clear the message. • Touch Attempt to print to restart the printer and continue printing. Network [x] software error [54] Try one or more of the following: • From the printer control panel, select Continue to continue printing. For non‑touch‑screen printer models, press to confirm. • Turn off the printer, wait for about 10 seconds, and then turn the printer back on. • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at http://support.lexmark.com. No analog phone line connected to modem, fax is disabled. Connect the printer to an analog phone line. Non‑Lexmark [supply type], see User's Guide [33.xy] Note: The supply type can be toner cartridge or imaging unit.