Lexmark MX417 User Guide - Page 164

Understanding the printer menus 164 General Fax Settings Use Restore Factory Defaults Optimize Fax Compatibility Fax Name Fax Number Fax ID Fax Name Fax Number Enable Manual Fax On Off Memory Use All receive Mostly receive Equal Mostly send All send Cancel Faxes Allow Don't Allow Caller ID Off Primary Alternate Fax number masking Off From left From right Digits to Mask 0-58 To Restore the factory defaults of all fax settings. Optimize fax compatibility with other fax machines. Specify the name of the fax in the printer. Specify the number assigned to the fax. Specify how the fax is identified. Note: Fax Number is the factory default setting. Set the printer to fax manually, which requires a line splitter and a telephone handset. Notes: • Off is the factory default setting. • Use a regular telephone to answer an incoming fax job and to dial a fax number. • Press # 0 on the numeric keypad to go directly to this setting. Define the allocation of non-volatile memory between sending and receiving fax jobs. Note: Equal is the factory default setting. Specify whether canceling of fax jobs is allowed. Note: Allow is the factory default setting. Specify the type of caller ID being used. Specify the direction from where digits are masked in an outgoing fax number. Notes: • Off is the factory default setting. • The number of characters masked is determined by the Digits to Mask setting. Specify the number of digits to mask in an outgoing fax number. Note: 0 is the factory default setting.